S8212B Electric Thermal Actuator 22CX 24V
Category:
Actuators
Summary:
Key word:
S8212B Electric Thermal Actuator 22CX 24V
Quick red flash =the valve is in closing movement
Quick green flash = the valve is in opening movement
Red fix =the valve is completely closed
1 slow green flash =the valve is opened between 10% and 20%
2 slow green flashes =the valve is opened between 20% and 30%
3 slow green flashes =the valve is opened between 30% and 40%
4 slow green flashes =the valve is opened between 40% and 50%
5 slow green flashes =the valve is opened between 50% and 60%
6 slow green flashes =the valve is opened between 60% and 70%
7 slow green flashes =the valve is opened between 70% and 80%
8 slow green flashes =the valve is opened between 80% and 90%
9 slow green flashes =the valve is opened between 90% and 100%
Green fixed =the valve is completely opened
INSTALLATION
1- Connect the power cable and the sensor on the valve
2- Take the valve without mounting it on the manifold of under floor heating.
Connect the valve on one of the two RJ9 connectors on the master (or slave) (Both have the same function) to supply it on and start the opening procedure.
3- The status LED lights up orange then will flash green showing that the valve has started the opening step. Wait the green fix on the status LED.
4- Take the valve and screw it on the manifold of the under floor heating.
5- After properly screwed the valve, you can connect the cable to the Master (or Slave) and the temperature sensor.
TECHNICAL CARACTERISTICS
|
Operating temperature |
0℃ to 50℃ |
|
Power supply |
24VAC +- 10% 50Hz |
|
Inputs |
. 1 RJ9 connection with Master (or Slave) to regulate valve position.
. 1 RJ9 connection with a temperature sensor to give the temperature to the Master (or Slave). |
|
Characteristics |
. 2.7mm running . 3sec to go from 0 to 2.7mm . Valve normally closed . Max strength 70N . Automatic search of the closure point for each set 0V (valve connection/disconnection) . Valve completely closed under 0.2V |
|
Consumption |
3W max (when motor is moving) |
|
Protection |
Class I - IP 30 |
|
Combination |
With Master 6 zones or Slave 6 zone |
Previous page
Previous page
S8214B 230V HVAC Electric Thermal Actuator
